Dell PowerConnect B-FCXs Configuration Manual page 903

PowerConnect(config)# show ip
Default router address: 10.44.16.1
TFTP server address: 10.44.16.41
Configuration filename: foundry.cfg
The following example shows output from the show ip address command for a Layer 2 device.
PowerConnect(config)# show ip address
IP Address
10.44.16.116
The following example shows output from the show ip address command for a base Layer 3 device.
PowerConnect(config)# show ip address
IP Address
10.44.3.233
The following example shows a Layer 2 device configuration as a result of the show run command.
PowerConnect(config)# show run
Current configuration:
!
ver 7.2.00aT7f1
!
module 1 FCX-24-port-management-module
!
!
ip address 10.44.16.116 255.255.255.0 dynamic
ip dns server-address 10.44.16.41
ip dhcp-client lease 174
ip default-gateway 10.44.16.1
!
!
end
The following example shows a base Layer 3 device configuration as a result of the show run
command.
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Switch IP address: 10.44.16.116
Subnet mask: 255.255.255.0
Image filename: None
Type
Dynamic
Type
Dynamic
1.0.0.1 Static
Configuring IP parameters – Layer 3 Switches
Lease Time Interface
174 0/1/1
Lease Time Interface
672651 0/1/2
N/A 0/1/15
26
861