Dell PowerConnect B-FCXs Configuration Manual page 912

26
Displaying IP configuration information and statistics
•
•
•
•
•
•
The following sections describe how to display this information.
In addition to the information described below, you can display the following IP information. This
information is described in other parts of this guide:
•
•
•
•
•
•
Displaying global IP configuration information
To display IP configuration information, enter the following command at any CLI level.
PowerConnect# show ip
Global Settings
ttl: 64, arp-age: 10, bootp-relay-max-hops: 4
router-id : 207.95.11.128
enabled : UDP-Broadcast-Forwarding
disabled: BGP4 Load-Sharing
Static Routes
Index
1
Policies
Index
1
64
Syntax: show ip
NOTE
This command has additional options, which are explained in other sections in this guide, including
the sections following this one.
This display shows the following information.
870
IP interfaces – refer to "Displaying IP interface information"
ARP entries – refer to "Displaying ARP entries"
Static ARP entries – refer to
IP forwarding cache – refer to
IP route table – refer to "Displaying the IP route table"
IP traffic statistics – refer to
RIP
OSPF
BGP4
DVMRP
PIM
VRRP or VRRPE
IP Address
0.0.0.0
Action Source
deny 209.157.22.34
permit any
on page 874.
"Displaying ARP entries" on page 874.
"Displaying the forwarding cache"
"Displaying IP traffic statistics"
IRDP Proxy-ARP
RIP DVMRP FSRP
Subnet Mask Next Hop Router
0.0.0.0 209.157.23.2
Destination
209.157.22.26
any
PowerConnect B-Series FCX Configuration Guide
on page 873.
on page 877.
on page 878.
on page 881.
RARP OSPF
VRRP
Metric Distance
1
Protocol Port
tcp http
1
Operator
=
53-1002266-01