Dell PowerConnect B-FCXs Configuration Manual page 1116

30
Displaying BGP4 information
TABLE 186
Field
TCP Connection state
Byte Sent
Byte Received
Local host
Local port
Remote host
Remote port
ISentSeq
SendNext
TotUnAck
TotSent
ReTrans
UnAckSeq
IRcvSeq
RcvNext
SendWnd
TotalRcv
DupliRcv
1074
BGP4 neighbor information (Continued)
Description
The state of the connection with the neighbor. The connection can have one of the
following states:
•
LISTEN – Waiting for a connection request.
•
SYN-SENT – Waiting for a matching connection request after having sent a
connection request.
•
SYN-RECEIVED – Waiting for a confirming connection request
acknowledgment after having both received and sent a connection request.
•
ESTABLISHED – Data can be sent and received over the connection. This is
the normal operational state of the connection.
•
FIN-WAIT-1 – Waiting for a connection termination request from the remote
TCP, or an acknowledgment of the connection termination request previously
sent.
•
FIN-WAIT-2 – Waiting for a connection termination request from the remote
TCP.
•
CLOSE-WAIT – Waiting for a connection termination request from the local
user.
•
CLOSING – Waiting for a connection termination request acknowledgment
from the remote TCP.
•
LAST-ACK – Waiting for an acknowledgment of the connection termination
request previously sent to the remote TCP (which includes an
acknowledgment of its connection termination request).
•
TIME-WAIT – Waiting for enough time to pass to be sure the remote TCP
received the acknowledgment of its connection termination request.
•
CLOSED – There is no connection state.
The number of bytes sent.
The number of bytes received.
The IP address of the Layer 3 Switch.
The TCP port the Layer 3 Switch is using for the BGP4 TCP session with the
neighbor.
The IP address of the neighbor.
The TCP port the neighbor is using for the BGP4 TCP session with the Layer 3
Switch.
The initial send sequence number for the session.
The next sequence number to be sent.
The number of sequence numbers sent by the Layer 3 Switch that have not been
acknowledged by the neighbor.
The number of sequence numbers sent to the neighbor.
The number of sequence numbers that the Layer 3 Switch retransmitted because
they were not acknowledged.
The current acknowledged sequence number.
The initial receive sequence number for the session.
The next sequence number expected from the neighbor.
The size of the send window.
The number of sequence numbers received from the neighbor.
The number of duplicate sequence numbers received from the neighbor.
PowerConnect B-Series FCX Configuration Guide
53-1002266-01