Dell PowerConnect B-FCXs Configuration Manual page 468

12
Configuring single link LACP
PowerConnect#show link-agg
System ID: 00e0.5200.0118
Long
Port
2/1
2/2
2/3
2/4
If singleton is configured on the port, the "Key" column displays "singleton". Refer to
link aggregation information"
Also, when ports are logically brought up or down while singleton is configured on the port, the
following Syslog messages are generated:
•
•
426
timeout: 120, default: 120 Short timeout: 3, default: 3
[Sys P] [Port P] [
1 1
1 1
1 1 singleton
1 1 singleton
Logical link on interface ethernet <slot#/port#> is up.
Logical link on interface ethernet <slot#/port#> is down.
Key ] [Act][Tio][Agg][Syn][Col][Dis][Def][Exp][Ope]
1 Yes S Agg
1 Yes S Agg
Yes S Agg
Yes S Agg
on page 423 to interpret the information on the displayed output.
Syn No No Def
Syn No No Def
Syn No No Def
Syn No No Def
PowerConnect B-Series FCX Configuration Guide
Exp Ina
Exp Ina
Exp Ina
Exp Dwn
"CLI display of
53-1002266-01