Dell PowerConnect B-FCXs Configuration Manual page 589

Configuring Rule-Based IP Access Control Lists (ACLs)
Table 91
TABLE 91
Feature
Hardware-based ACLs
Standard named and numbered ACLs
Extended named and numbered ACLs
User input preservation for ACL TCP/UDP
port numbers
ACL comment text
ACL logging of denied packets
ACL logging with traffic rate limiting (to
prevent CPU overload)
Strict control of ACL filtering of
fragmented packets
ACL support for switched traffic in the
router image
ACL filtering based on VLAN membership
or VE port membership
ACLs to filter ARP packets
Filtering on IP precedence and ToS value
Combined DSCP and internal marking in
one ACL rule
QoS options for IP ACLs
Priority mapping using ACLs
Hardware usage statistics
Policy-based routing (PBR)
(Supported in the full Layer 3 code only)
This chapter describes how Access Control Lists (ACLs) are implemented and configured in the Dell
PowerConnect devices.
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
lists the individual Dell PowerConnect switches and ACL features they support.
Supported ACL features
PowerConnect B-Series FCX
Yes
Yes
Yes
Yes
Yes
Yes
Yes
This feature is enabled by default on PowerConnect
B-Series FCX devices. There is no CLI command to enable
or disable it.
Yes
Yes
This feature is enabled by default on PowerConnect
B-Series FCX devices. There is no CLI command to enable
or disable it.
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Chapter
16
547