Dell PowerConnect B-FCXs Configuration Manual page 722

23
Reading CDP packets
PowerConnect# show fdp neighbors ethernet 1/1
Device ID: Router
Entry address(es):
IP address: 207.95.6.143
Platform: cisco RSP4,
Interface: Eth 1/1,
Holdtime : 127 seconds
Version :
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JSV-M), Version 12.0(5)T1,
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 19-Aug-99 04:12 by cmong
Syntax: show fdp neighbors [detail | ethernet <port>]
Displaying CDP entries
To display CDP entries for all neighbors, enter the following command.
PowerConnect# show fdp entry *
Device ID: Router
Entry address(es):
IP address: 207.95.6.143
Platform: cisco RSP4,
Interface: Eth 1/1,
Holdtime : 124 seconds
Version :
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JSV-M), Version 12.0(5)T1,
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 19-Aug-99 04:12 by cmong
To display CDP entries for a specific device, specify the device ID. Here is an example.
PowerConnect# show fdp entry Router1
Device ID: Router1
Entry address(es):
IP address: 207.95.6.143
Platform: cisco RSP4,
Interface: Eth 1/1,
Holdtime : 156 seconds
Version :
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JSV-M), Version 12.0(5)T1,
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 19-Aug-99 04:12 by cmong
Syntax: show fdp entry * | <device-id>
Displaying CDP statistics
To display CDP packet statistics, enter the following command.
680
Capabilities: Router
Port ID (outgoing port): FastEthernet5/0/0
Capabilities: Router
Port ID (outgoing port): FastEthernet5/0/0
Capabilities: Router
Port ID (outgoing port): FastEthernet5/0/0
RELEASE SOFTWARE
RELEASE SOFTWARE
RELEASE SOFTWARE
PowerConnect B-Series FCX Configuration Guide
53-1002266-01