Dell PowerConnect B-FCXs Configuration Manual page 261

Powerconnect b-series fcx
Hide thumbs Also See for PowerConnect B-FCXs:
Table of Contents

Advertisement

PowerConnect#show vlans
Total PORT-VLAN entries: 2
Maximum PORT-VLAN entries: 16
legend: [S=Slot]
PORT-VLAN 1, Name DEFAULT-VLAN, Priority level0, Spanning tree On
Untagged Ports: (S3)
Untagged Ports: (S3) 17 18 19 20 21 22 23 24
Untagged Ports: (S4)
Untagged Ports: (S4) 18 19 20 21 22 23 24
Tagged Ports: None
Uplink Ports: None
PORT-VLAN 2, Name greenwell, Priority level0, Spanning tree Off
Untagged Ports: (S1)
Untagged Ports: (S4)
Tagged Ports: None
Uplink Ports: None
Syntax: show vlan [<vlan-id> | ethernet <port>]
The <vlan-id> parameter specifies a VLAN for which you want to display the configuration
information.
The ethernet <port> parameter specifies a port. If you use this parameter, the command lists all
the VLAN memberships for the port. Specify the <port> variable in the following formats:
Displaying detailed STP information for each interface
To display the detailed STP information, enter the following command at any level of the CLI.
PowerConnect#show span detail
======================================================================
VLAN 1 - MULTIPLE SPANNING TREE (MSTP) ACTIVE
======================================================================
Bridge identifier
Active global timers - Hello: 0
Port 1/1 is FORWARDING
Port - Path cost: 19, Priority: 128, Root: 0x800000e052a9bb00
Designated - Bridge: 0x800000e052a9bb00, Interface: 1, Path cost: 0
Active Timers - None
BPDUs - Sent: 11, Received: 0
Port 1/2 is DISABLED
Port 1/3 is DISABLED
Port 1/4 is DISABLED
<lines for remaining ports excluded for brevity>
NOTE
The line in the above output, VLAN 1 - MULTIPLE SPANNING TREE (MSTP) ACTIVE, is not the 802.1s
standard. It is the same Global STP (IEEE 802.1D) type as shown in the output of the show span CLI
command.
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
1
2
1
1
PowerConnect B-Series FCX stackable switches – <stack-unit/slotnum/portnum>
- 0x800000e0804d4a00
Configuring standard STP parameters
2
3
4
5
6
7
8
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16
8
219

Advertisement

Table of Contents
loading

Table of Contents