Displaying Ospf Trap Status; Displaying Ospf Graceful Restart Information - Dell PowerConnect B-FCXs Configuration Manual

29
Displaying OSPF information
PowerConnect#show ip ospf border-routers
Syntax: show ip ospf border-routers [<ip-addr>]
The <ip-addr> parameter displays the ABR and ASBR entries for the specified IP address.

Displaying OSPF trap status

All traps are enabled by default when you enable OSPF. To disable or re-enable an OSPF trap, refer
to "Modifying OSPF traps generated"
To display the state of each OSPF trap, enter the following command at any CLI level.
PowerConnect#show ip ospf trap
Interface State Change Trap:
Virtual Interface State Change Trap:
Neighbor State Change Trap:
Virtual Neighbor State Change Trap:
Interface Configuration Error Trap:
Virtual Interface Configuration Error Trap:
Interface Authentication Failure Trap:
Virtual Interface Authentication Failure Trap:
Interface Receive Bad Packet Trap:
Virtual Interface Receive Bad Packet Trap:
Interface Retransmit Packet Trap:
Virtual Interface Retransmit Packet Trap:
Originate LSA Trap:
Originate MaxAge LSA Trap:
Link State Database Overflow Trap:
Link State Database Approaching Overflow Trap:
Syntax: show ip ospf trap

Displaying OSPF graceful restart information

To display OSPF graceful restart information for OSPF neighbors, use the show ip ospf neighbors
command.
PowerConnect#show ip ospf neighbors
Port
2/7
< in graceful restart state,
Syntax: show ip ospf neighbor
Use the following command to display Type 9 grace LSAs on a PowerConnect Layer 3 switch.
PowerConnect#show ip ospf database grace-link-state
Graceful Link States
Area
0
Syntax: show ip ospf database grace-link-state
978
Address Pri State
50.50.50.10 0 FULL/OTHER
Interface Adv Rtr Age Seq(Hex) Prd Rsn
eth 1/2 2.2.2.2 7
on page 961.
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Neigh Address
50.50.50.1
helping 1, timer 60 sec >
Nbr Intf IP
80000001 60 SW 6.1.1.2
PowerConnect B-Series FCX Configuration Guide
Neigh ID Ev Opt Cnt
10.10.10.30 21 66
53-1002266-01
0