Displaying Pvlan Information - Dell PowerConnect B-FCXs Configuration Manual

13
Displaying VLAN information
•
•
•
PowerConnect# show interfaces brief
Port
1
2
3
4
5
6
7
8
9
10
Syntax: show interfaces brief [ethernet [<slotnum>/]<portnum> [to [<slotnum>/]<portnum>
The <slotnum> parameter is required on chassis devices.

Displaying PVLAN information

To display the PVLAN configuration with respect to the primary VLAN and its associated secondary
VLANs and to display the member ports, promiscous ports, and the switch-switch link ports of a
PVLAN, enter a command such as the following.
PowerConnect# show pvlan
PVLAN: primary VLAN
Port 1/1/4 1/1/10 1/1/11
Community VLAN
Port 1/1/1 1/1/2 1/1/10 1/1/11
Promiscuous Port: 1/1/4
Inter switch link Port: 1/1/10 1/1/11
BpduGuard enabled Port: 1/1/1 1/1/2
Isolate
Port 1/1/3 1/1/10 1/1/11
Promiscuous Port: 1/1/4
Inter switch link Port: 1/1/10 1/1/11
BpduGuard enabled Port: 1/1/1 1/1/2
Syntax: show pvlan <vid>
The <vid> variable specifies the VLAN ID of the PVLAN. If the VLAN ID is not specified, the
command displays the default VLAN ID.
504
For untagged ports, the PVID is the VLAN ID number.
For dual-mode ports, the PVID is the dual-mode VLAN ID number.
For tagged ports without dual-mode, the PVID is always Not Applicable (NA).
Link State Dupl Speed Trunk Tag Pvid Pri MAC
Up Forward Full 1G
Up Forward Full 1G
Up Forward Full 1G
Up Forward Full 1G
Up Forward Full 1G
Down None None None
Down None None None
Down None None None
Down None None None
Down None None None
[ethernet [<slotnum>/]<portnum>...]]]
100
102
VLAN 101
None No 1 0 0012.f2a8.4700 a12345678901
None Yes 1 0 0012.f2a8.4701
None Yes NA 0 0012.f2a8.4702
None Yes NA 0 0012.f2a8.4703
None No 2 0 0012.f2a8.4704
None Yes NA 0 0012.f2a8.4705
None Yes 4 0 0012.f2a8.4706
None Yes 4 0 0012.f2a8.4707
None Yes NA 0 0012.f2a8.4708
None Yes NA 0 0012.f2a8.4709
PowerConnect B-Series FCX Configuration Guide
Name
53-1002266-01