Dell PowerConnect B-FCXs Configuration Manual page 795

TABLE 129
This field...
BSR address
or
local BSR address
Uptime
BSR priority
or
local BSR priority
Hash mask length
Next bootstrap
message in
Next
Candidate-PR-adverti
sement message in
RP
group prefixes
Candidate-RP-adverti
sement period
Displaying Pim resources
To display the hardware resource information such as hardware allocation, availability, and limit for
software data structure, enter the following command.
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Output of show ip pim bsr
Displays...
The IP address of the interface configured as the PIM Sparse Bootstrap Router (BSR).
NOTE: If the word "local" does not appear in the field, this Layer 3 Switch is the BSR. If the
word "local" does appear, this Layer 3 Switch is not the BSR.
The amount of time the BSR has been running.
NOTE: This field appears only if this Layer 3 Switch is the BSR.
The priority assigned to the interface for use during the BSR election process. During BSR
election, the priorities of the candidate BSRs are compared and the interface with the
highest BSR priority becomes the BSR.
NOTE: If the word "local" does not appear in the field, this Layer 3 Switch is the BSR. If the
word "local" does appear, this Layer 3 Switch is not the BSR.
The number of significant bits in the IP multicast group comparison mask. This mask
determines the IP multicast group numbers for which the Layer 3 Switch can be a BSR.
The default is 32 bits, which allows the Layer 3 Switch to be a BSR for any valid IP
multicast group number.
NOTE: This field appears only if this Layer 3 Switch is the BSR.
Indicates how many seconds will pass before the BSR sends its next Bootstrap message.
NOTE: This field appears only if this Layer 3 Switch is the BSR.
Indicates how many seconds will pass before the BSR sends its next candidate PR
advertisement message.
NOTE: This field appears only if this Layer 3 Switch is the BSR.
Indicates the IP address of the Rendezvous Point (RP).
NOTE: This field appears only if this Layer 3 Switch is the BSR.
Indicates the multicast groups for which the RP listed by the previous field is a candidate
RP.
NOTE: This field appears only if this Layer 3 Switch is the BSR.
Indicates how frequently the BSR sends candidate RP advertisement messages.
NOTE: This field appears only if this Layer 3 Switch is the BSR.
25
PIM Sparse
753