Dell PowerConnect B-FCXs Configuration Manual page 1021

Table 180
TABLE 180
Field
Area
Interface
Adv Rtr
Age
Seq (Hex)
Prd
Rsn
Nbr Intf IP
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
defines the fields in the show output.
CLI display of OSPF database grace LSA information
Definition
The OSPF area that the interface configured for OSPF graceful restart is
in.
The interface that is configured for OSPF graceful restart.
The ID of the advertised route.
The age of the LSA in seconds.
The sequence number of the LSA. The OSPF neighbor that sent the LSA
stamps the LSA with a sequence number. This number enables the
PowerConnect and other OSPF routers to determine the most recent LSA
for a given route.
The grace period. The number of seconds that the neighbor routers
should continue to advertise the router as fully adjacent, regardless of
the state of database synchronization between the router and its
neighbors. Since this time period begins when the grace LSA LS age is
equal to 0, the grace period terminates when either the LS age of the
grace LSA exceeds the value of a grace period or the grace LSA is flushed.
The reason for the graceful restart. Possible values:
•
•
•
•
The IP address of the OSPF graceful restart neighbor.
Displaying OSPF information
UK – Unknown
RS – Software restart
UP – Software upgrade or reload
SW – Switch to redundant control processor
29
979