Dell PowerConnect B-FCXs Configuration Manual page 433

Powerconnect b-series fcx
Hide thumbs Also See for PowerConnect B-FCXs:
Table of Contents

Advertisement

The <group-ID> parameter specifies the protected link group number. Enter a number from 1 – 32.
The active-port ethernet <port> defines the active port. Specify the <port> variable in the following
formats:
Viewing information about protected link groups
You can use the following show commands to view information about protected link groups:
The following shows example output for the show protected-link-group command.
PowerConnect#show protected-link-group
Group ID: 1
Member Port(s): ethe 1 to 7
Configured Active Port: 7
Current Active Port: 7
Standby Port(s): ethe 5
Total Number of Protected Link Groups: 1
Syntax: show protected-link-group [<group-ID>]
TABLE 69
This field...
Group ID
Member Port(s)
Configured Active Port
Current Active Port
Standby Port(s)
The show interface brief command also displays information about protected link groups.
Example
PowerConnect#show int brief e 3 to 4
Port
3
4
In the above output, the State of port 3 is Inactive, which means port 3 is an inactive port in a
protected link group. For active ports in a protected link group, the State will be Active.
Syntax: show interface brief ethernet <port>
Specify the <port> variable in the following formats:
The show interface command also displays information about protected link groups.
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
PowerConnect B-Series FCX stackable switches – <stack-unit/slotnum/portnum>
show protected-link-group
show interface brief
show interface
CLI display of protected link group information
Displays...
The ID number of the protected link group.
The ports that are members of the protected link group.
The statically configured active port. If you do not statically configure an active
port, this value will be "None".
The current active port for the protected link group. If all member ports are
down, this value will be "None".
The member ports that are on standby.
Link
State
Dupl Speed Trunk Tag Priori MAC
Up
Inactive
Full Auto
Up
Forward
Full 1G
PowerConnect B-Series FCX stackable switches – <stack-unit/slotnum/portnum>
Protected link groups
None
Yes level0 0012.f2a8.7140
None
Yes level0 0012.f2a8.7140
11
Name
391

Advertisement

Table of Contents
loading

Table of Contents