Displaying Mac Addresses In A Mac-Based Vlan - Dell PowerConnect B-FCXs Configuration Manual

15
Displaying Information about MAC-based VLANs

Displaying MAC addresses in a MAC-based VLAN

Enter the following command to display a list of MAC addresses in a MAC-based VLAN.
PowerConnect#show mac-address
Total active entries from all ports = 1541
MAC-Address
0000.2000.0001
0000.2000.0002
0000.2000.0003
0000.2000.0004
0000.2000.0005
0000.2000.0006
0000.2000.0007
0000.2000.0008
0000.2000.0009
0000.2000.000a
0000.2000.000b
NOTE
In this output, (MBV) indicates MAC-based VLAN is enabled.
The following table describes the output from this command.
This field...
Total active entries
MAC Address
Port
Type
Index
VLAN
542
Port Type
0/1/32 Dynamic(MBV)
0/1/32 Dynamic(MBV)
0/1/32 Dynamic(MBV)
0/1/32 Static(MBV)
0/1/32 Dynamic(MBV)
0/1/32 Dynamic(MBV)
0/1/32 Dynamic(MBV)
0/1/32 Dynamic(MBV)
0/1/32 Dynamic(MBV)
0/1/32 Dynamic(MBV)
0/1/32 Dynamic(MBV)
Displays...
The total number of active entries for all ports.
The MAC addresses assigned to this VLAN.
The interface for which this information is displayed.
Dynamic (MBV) Indicates a dynamic host. Static (MBV) indicates a static host.
The index of the entry in the hardware MAC table.
The VLAN to which these addresses are assigned.
Index VLAN
1048 1
1832 1
9772 1
328 1
8268 1
9084 1
632 1
3464 1
11404 1
12220 1
3768 1
PowerConnect B-Series FCX Configuration Guide
53-1002266-01