Table of Contents
Advertisement
You can now press the
"
" or press the
DEFINE PANEL
4.9.6 Enabling the Memory Prompt
Here you determine whether the user will receive indication that an alarm has been activated.
Available options are: enable (default) and disable.
To Enable the Memory Prompt
1.
Make sure the system is disarmed and then press the
repeatedly until the PowerMax10-G2 display reads "INSTALLER MODE".
2.
When the PowerMax10-G2 display reads [INSTALLER MODE], press
The screen will now prompt you to enter your installer code.
3.
Enter your Installer Code.
4.
Click the
or
option.
5.
When the PowerMax10-G2 display reads [DEFINE PANEL], press
The PowerMax10-G2 display will read [01:ENTRY DELAY 1].
6.
When the PowerMax10-G2 display reads [01:ENTRY DELAY 1], click the
or
PROMPT].
7.
Press
and make the selection and then press
I
OK
The PowerMax10-G2 display will revert to [28:MEMORY PROMPT].
You can now press the
"
" or press the
DEFINE PANEL
4.9.7 Enabling Keyfob Low Battery Acknowledgement
Here you determine whether the user will hear or will not hear low battery sound when he tries to disarm the system with a
keyfob whose battery voltage is low.
Available options are: keyfob L-B on - the user has to acknowledge the keyfob low battery message, or, keyfob L-B off
(default) - the user does not have to acknowledge the keyfob low battery message.
To Enable Keyfob Low Battery Acknowledgement
1.
Make sure the system is disarmed and then press the
repeatedly until the PowerMax10-G2 display reads "INSTALLER MODE".
2.
When the PowerMax10-G2 display reads [INSTALLER MODE], press
The screen will now prompt you to enter your installer code.
3.
Enter your Installer Code.
4.
Click the
or
option.
5.
When the PowerMax10-G2 display reads [DEFINE PANEL], press
The PowerMax10-G2 display will read [01:ENTRY DELAY 1].
6.
When the PowerMax10-G2 display reads [01:ENTRY DELAY 1], click the
52
or
button to program any other menu in
button to take you to "
button repeatedly and select the [DEFINE PANEL]
button repeatedly until the display will read [28:MEMORY
or
button to program any other menu in
button to take you to "
button repeatedly and select the [DEFINE PANEL]
".
<OK> TO EXIT
button
.
I
OK
I
OK
to confirm.
I
OK
".
<OK> TO EXIT
button
.
I
OK
I
OK
READY 00:00
INSTALLER MODE
I
OK
ENTER CODE:
CODE
or
DEFINE PANEL
I
OK
01:ENTRY DELAY 1
or
28:MEMORY PROMPT
I
OK
SELECT OPTION
I
OK
28:MEMORY PROMPT
READY 00:00
INSTALLER MODE
I
OK
ENTER CODE:
CODE
or
DEFINE PANEL
I
OK
01:ENTRY DELAY 1
or
D-302756
Advertisement
Table of Contents
