Config Ports Monitor Vlan - Extreme Networks ExtremeWare Command Reference Manual

VLAN Commands

config ports monitor vlan

config ports <portlist> monitor vlan <vlan name>
Description
Configures VLAN statistic monitoring on a per-port basis.
Syntax Description
portlist
vlan name
Default
N/A.
Usage Guidelines
None.
Example
The following command configures per port monitoring for a set of ports on slot 8 for the VLAN
named accounting:
config ports 8:1-8:6 monitor vlan accounting
You can monitor up to four VLANs on the same port by issuing the command four times. For example,
if you want to monitor VLANs dog1, dog2, dog3, and dog4 on slot 1, use the following commands:
config ports 1:* monitor vlan dog1
config ports 1:* monitor vlan dog2
config ports 1:* monitor vlan dog3
config ports 1:* monitor vlan dog4
After you have configured the ports for monitoring, you can use the show ports vlan statistics
command to display information for the configured ports:
show ports 1:* vlan statistics
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
234
Specifies one or more ports. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
Specifies a VLAN name.
ExtremeWare Software 7.0.0 Command Reference Guide