Extreme Networks ExtremeWare Command Reference Manual page 157

config mirroring add
For MAC mirroring to work correctly, the MAC address must already be present in the forwarding
database (FDB). You need to enable and configure FDB for MAC mirroring to work correctly. See "FDB
Commands" for more details.
Example
The following example sends all traffic coming into or out of a stand-alone switch on port 1 and the
VLAN default to the mirror port:
config mirroring add ports 1 vlan default
The following example sends all traffic coming into or out of a modular switch on slot 3, port 2 and the
VLAN default to the mirror port:
config mirroring add ports 3:2 vlan default
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 4.0 to support modular switches.
This command was modified in ExtremeWare 6.0 to discontinue support for the MAC address
parameter.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.0.0 Command Reference Guide 157