The Installhdlm Utility For Installing Hdlm - Hitachi XP P9500 User Manual

Hitachi dynamic link manager software user guide for solaris (6.6) (hit5205-96011, november 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Entries for these devices are output for each LU, and are sorted in
alphabetic order, using the logical device file name as a key.
exclude_all 0
paths
c3t0d10s2 /pci@8,600000/pci@1/JNI,FCE@4/sd@0,a
c3t0d11s2 /pci@8,600000/pci@1/JNI,FCE@4/sd@0,b
c3t0d12s2 /pci@8,600000/pci@1/JNI,FCE@4/sd@0,c
c3t0d13s2 /pci@8,600000/pci@1/JNI,FCE@4/sd@0,d
c4t1d10s2 /pci@8,600000/pci@1/JNI,FCE@5/sd@1,a
c4t1d11s2 /pci@8,600000/pci@1/JNI,FCE@5/sd@1,b
c4t1d12s2 /pci@8,600000/pci@1/JNI,FCE@5/sd@1,c
c4t1d13s2 /pci@8,600000/pci@1/JNI,FCE@5/sd@1,d
c6t1d10s2 /pseudo/dlmndrv@2/dlmfdrv@1,a
c6t1d11s2 /pseudo/dlmndrv@2/dlmfdrv@1,b
c6t1d12s2 /pseudo/dlmndrv@2/dlmfdrv@1,c
c6t1d13s2 /pseudo/dlmndrv@2/dlmfdrv@1,d
#
controllers
#
product
#
pathgroups
#
Note
Only a user with root permissions can execute the dlmvxexclude utility
for assisting creation of the VxVM configuration file.
After installing HDLM, you need to execute the dlmvxexclude utility after
executing the dlmsetconf utility for creating the HDLM driver
configuration definition file.
Do not use the output result of the dlmvxexclude utility as is for the
vxvm.exclude file. If a device other than the HDLM-managed devices has
already been invalidated in VxVM, then the invalidated setting might be
canceled.

The installhdlm Utility for Installing HDLM

You can use the installhdlm utility to perform a new installation, upgrade
installation, or re-installation of HDLM in unattended installation mode. You
must predefine how the utility is to respond during installation in the
installation-information settings file.
For details on the procedure for performing an unattended installation, see
Performing a New Installation of HDLM (When Sun Cluster Is Not Being Used)
7-28
Only one HDLM device is created for one HDLM-managed device (one
slice). However, VxVM assumes that the number of HDLM devices
created for one HDLM-managed device is the same as the number of
physical paths. Thus, executing the dlmvxexclude utility outputs
entries for HDLM devices that have not actually been created.
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynamic link manager

Table of Contents