Hitachi XP P9500 User Manual page 116

saved, is output. Enter 1 if a user-specified license key file has been
saved. Enter 2 if a license key is specified directly.
¢
If 1 is entered, specify a user-specified license key file with the absolute
path.
¢
If 2 is entered, a message that prompts you to enter a license key is
displayed. Enter the license key.
¢
¢
If you interrupt an installation, check whether the /var/opt/
DynamicLinkManager directory exists.
If the /var/opt/DynamicLinkManager directory exists, execute the
following command to delete it:
# rm -rf /var/opt/DynamicLinkManager
8 Execute the following command to check whether HDLM 7.2 has been
.
installed successfully:
Make sure that VERSION appears as 07.2.0.0000.
# pkginfo -l DLManager
CATEGORY:
#
9 Make sure that the logical device file of the sd or ssd device is backed up.
.
After you execute the dlmsetconf utility for creating the HDLM driver
configuration definition file in the next step(s) (either step 10, or steps 10
and 11) and restart the host with the reconfiguration option specified, the
logical device files of the sd or ssd devices to be managed by HDLM will
be erased. Before you execute the dlmsetconf utility and restart the
host, confirm that these files have been backed up. For details on how to
back up files, see
HDLM on page 3-41
page
10 Execute the dlmsetconf utility as follows to create the HDLM driver
.
configuration definition file (/kernel/drv/dlmfdrv.conf) and the HDLM
3-52
Note that if any value other than 1 or 2 is entered three times, the
installation is stopped.
Note that if the wrong absolute path is entered three times, the
installation is stopped.
When a correct license key is entered, the installation program
displays a message that indicates the license was installed.
Take care that if you enter an incorrect license key three times,
installation stops.
PKGINST: DLManager
NAME: Dynamic Link Manager
system
ARCH: sparc
VERSION: xx.x.x.xxxx
BASEDIR: /
VENDOR:
...
Performing Operations on Devices to Be Managed by
in Preparations for a New Installation of HDLM on
3-41.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))