Format; Parameters - Hitachi XP P9500 User Manual

creation of the VxVM configuration file outputs the contents of the file to the
standard output.

Format

/opt/DynamicLinkManager/bin/dlmvxexclude [-d output-directory-name|
-h ]

Parameters

-d output-directory-name
Specifies the path name of the directory to which the file is to be output.
You cannot specify multi-byte characters. If the directory specified here
contains a regular file having the same name as vxvm_exclude.txt, the
confirmation prompt appears. Entering Y or y creates a backup file with
the name vxvm_exclude.txt.bak and creates a new vxvm_exclude.txt
file. An error occurs if a file name is specified for the output directory, the
directory does not exist, or the output directory name is not specified with
the -d parameter.
-h
Displays help about the usage of the command.
Examples
Example 1
In this example, the dlmvxexclude utility outputs the settings of the
VxVM management exclusion for the contents of the current HDLM
configuration definition file (/kernel/drv/dlmfdrv.conf) to standard
output:
# /opt/DynamicLinkManager/bin/dlmvxexclude
Example 2
In this example, the dlmvxexclude utility outputs the settings of the
VxVM management exclusion for the contents of the current HDLM
configuration definition file (/kernel/drv/dlmfdrv.conf) to the /tmp/
vxvm_exclude.txt file.
# /opt/DynamicLinkManager/bin/dlmvxexclude -d /tmp
Display example
Example
The entries for the following devices are output:
¢
¢
sd or ssd devices for HDLM-managed devices
HDLM devices that are not actually created
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
7-27