Hitachi XP P9500 User Manual page 270

3 Execute the dlmsetconf utility for creating the HDLM driver configuration
.
definition file to update the HDLM driver configuration definition file (/
kernel/drv/dlmfdrv.conf).
# /opt/DynamicLinkManager/bin/dlmsetconf
4 Set up LUs not to be managed by HDLM.
.
If you do not want HDLM to manage one of the newly recognized LUs, set
up the LU so that it is excluded from HDLM management. For details, See
Using the HDLM Device Unconfiguration Function When Performing a New
Installation of HDLM on page
If you do not want to specify settings to exclude such LUs from
management, skip to step 5.
5 If you are using VxVM, you need to disable, from VxVM, any devices
.
(such as sd or ssd devices) other than the HDLM devices corresponding to
the added LU.
Specify settings as shown in
Basis on page 3-142
page 3-146
6 Force the HDLM driver to recognize the added LU.
.
In environments supporting dynamic reconfiguration of HDLM devices,
execute the dlmcfgmgr utility for managing the HDLM configuration.
HDLM device will be reconfigured without restarting the host.
4-24
Figure 4-1 Example of executing the format command
or Removing Devices From VxVM on a Path Basis on
of Removing Devices from VxVM on page
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
3-66.
Removing Devices from VxVM on a Controller
3-140.