Hitachi XP P9500 User Manual page 162

3 Get Solaris to recognize the LUs to be used by the post-migration boot
.
disk.
4 Set the LU slices to be used by the post-migration boot disk.
.
¢
¢
5 Assign device IDs.
.
The following shows an example of executing the command:
# /usr/cluster/bin/scdidadm -r
6 Notify the server of the new device ID information.
.
The following shows an example of executing the command:
# /usr/cluster/bin/scdidadm -ui
7 Update the Sun Cluster global device namespace.
.
The following shows an example of executing the command:
# /usr/cluster/bin/scgdevs
8 If the post-migration boot disk is an HDLM-managed device, exclude it
.
from HDLM management by executing the procedure described in
the HDLM Device Unconfiguration Function When Performing a New
Installation of HDLM on page
9 Set the boot block for the post-migration environment, specifying the
.
post-migration slice 0 (/ (root) file system).
The following shows an example of executing the command:
# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/
rdsk/c0t0d0s0
10 Initialize the Solaris file system in the post-migration environment. If
.
using Sun Cluster, also initialize the Sun Cluster global device file system.
The following shows an example of executing the command:
# newfs /dev/rdsk/c0t0d0s0
# newfs /dev/rdsk/c0t0d0s6
# newfs /dev/rdsk/c0t0d0s3
11 Mount the Solaris file system in the post-migration environment. If using
.
Sun Cluster, also mount the Sun Cluster global device file system.
The following shows an example of executing the command:
# mount /dev/dsk/c0t0d0s0 /mnt0
# mount /dev/dsk/c0t0d0s6 /mnt1
# mount /dev/dsk/c0t0d0s3 /mnt2
3-98
If using Sun Cluster, go to the next step.
If not using Sun Cluster, go to step 8.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
3-66.
Using