To Display The Format Of The Offline Operation - Hitachi XP P9500 User Manual

-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message: for
example, when you want to execute the command in a shell script or
batch file.
Example

To display the format of the offline operation

-help
Displays the format of the offline operation.
Example
6-10
The following shows an example of how to place offline all paths
whose SCSI device name is sd52 while confirming command
operation.
# /opt/DynamicLinkManager/bin/dlnkmgr offline -path –device
sd52
KAPL01052-I The currently selected paths will be changed to
the Offline(C) status. Is this OK? [y/n]:y
KAPL01053-I If you are sure that there would be no problem
when the path is placed in the Offline(C) status, enter y.
Otherwise, enter n. [y/n]:y
KAPL01061-I 1 path(s) were successfully placed Offline(C); 0
path(s) were not. Operation name = offline
The following example shows how to place a path, whose
AutoPATH_ID is 000001, offline without asking for confirmation of
command execution from the user:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -pathid 1 -s
KAPL01061-I 1 path(s) were successfully placed Offline(C); 0
path(s) were not. Operation name = offline
#
The following example shows how to display the format of the
offline operation:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -help
offline:
Format
dlnkmgr offline [-path]
HBA_ID } [-s]
dlnkmgr offline [-path] { -cha -pathid AutoPATH_ID | -
chaid CHA_ID } [-s]
dlnkmgr offline [-path] -pathid AutoPATH_ID [-
s]
dlnkmgr offline [-path] -device SCSI_Device_Name [-s]
Valid value
AutoPATH_ID
Command Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
{ -hba HBAPortNumber.BusNumber | -hbaid
{ 000000 - 999999 }(Decimal)