Uninstalling Hdlm; Uninstalling Hdlm From The Local Boot Disk Environment - Hitachi XP P9500 User Manual

The following shows an example of executing the command:
host1# umount /mnt/filesystem1
2 Delete the SVM local volume that is using the HDLM device.
.
The following shows an example of executing the command to delete SVM
local volume d0.
host1# metaclear d0
When using a shared diskset
1 Delete the shared volume.
.
The following shows an example of executing the command.
When not using Sun Cluster:
host1# umount /diskset1
host1# metaclear -s diskset1 d1
When using Sun Cluster:
host1# umount /global/diskset1/d1
host1# metaclear -s diskset1 d1
2 Delete the disk from the shared diskset.
.
The following shows an example of executing the command.
When not using Sun Cluster:
host1# metaset -s diskset1 -d -f c5t1d2 c5t1d3
When using Sun Cluster:
host1# metaset -s diskset1 -d -f /dev/did/dsk/d10 /dev/did/
dsk/d11
3 Delete the shared diskset.
.
The following shows an example of executing the command.
host1# metaset -s diskset1 -d -f -h host1 host2

Uninstalling HDLM

Uninstalling HDLM from the Local Boot Disk Environment

When you uninstall HDLM, if the KAPL09019-E or KAPL09020-E message is
output, follow the procedure described in
Objectplaza Trace Library (HNTRLib2) on page 3-180
However, if the KAPL09026-I message is output, since a program other than
HDLM is using Hitachi Network Objectplaza Trace Library (HNTRLib2), only
HDLM will be uninstalled.
Note
When uninstalling HDLM on a host where a Device Manager Agent 5.0 or
later is installed, do not execute any of the following commands of Device
Manager Agent during uninstallation. Also, do not uninstall HDLM while
executing any of the following Device Manager Agent commands:
hbsasrv, HiScan, hdvmagt_account, hdvmagt_schedule, hldutil, TIC
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Uninstalling Hitachi Network
to uninstall HNTRLib2.
3-171