Hitachi XP P9500 User Manual page 487

Message
Message Text
ID
KAPL09216 An error occurred during I/O of a
-E file that installhdlm uses. Error
Code = aa...aa,bb...bb
KAPL09217 An error occurred during reading
-E of the installation information
settings file. Error Code =
aa...aa,bb...bb
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
If the error code is 7:
If the error code is 10:
If the error code is 11:
Details
An error occurred during I/O of a
file that installhdlm uses.
aa...aa: Error number that
indicates the executed processing
(decimal (base-10) number)
bb...bb: Return value of the
executed processing (decimal
(base-10) number)
Action
Make sure that sufficient free
capacity exists for the /var/tmp
directory. If the capacity is
insufficient, allocate the required
amount of capacity, and then retry
the operation. For details about
the required free capacity, see
Disk Capacity Requirements on
page 3-32
Capacity Requirements on page
3-31.
Details
An error occurred while reading
the installation information
settings file.
Messages
Explanation
permissions for the file system
of the /var/tmp directory.
There is not enough free
capacity for the file system of
the /var/tmp directory. Make
sure there is enough free
capacity in the /var/tmp
directory.
The dlmsetconf command is
not in the default location or
you do not have execution
permission for the dlmsetconf
command. Check the status of
the dlmsetconf command.
The reboot command is not in
the default location or you do
not have execution permission
for the reboot command.
Check the status of the
reboot command.
in Memory and Disk
8-63