Setting The Trace Level - Hitachi XP P9500 User Manual

Value
0
1
2
3
4
If an error occurs, you might have to change the collection level to 1 or
higher to collect any log information.
The higher this value is set, the more information that will be output. As the
amount of log information to be output increases, it will take less time to
overwrite the old error log information with the new information.
The following is an example of setting up the error log collection level by
using a command:
# /opt/DynamicLinkManager/bin/dlnkmgr set -ellv 2
Specify the error log collection level as a number.

Setting the Trace Level

You can set up the trace level for a trace file hdlmtrn.log (n indicates a file
number from 1 to 64).
Table 3-26 Values for the trace level setting on page 3-124
describes the possible values for the trace level setting.
0
1
2
3
4
If an error occurs, you might have to set the trace level to 1 or higher to
collect any trace information.
The higher this value is set, the more information that will be output. As the
amount of trace information to be output increases, it will take less time to
overwrite the old trace information with the new information.
3-124
Table 3-25 Values for the error log collection level setting
No error logs are collected.
All information for errors of the "Error" level or higher is collected.
All information for errors of the "Warning" level or higher is collected.
All information for errors of the "Information" level or higher is collected.
All information for errors of the "Information" level or higher (including
maintenance information) is collected.
Table 3-26 Values for the trace level setting
Value
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Description
Description
No trace is output.
Only error information is output.
Program operation summaries are output.
Program operation details are output.
All information is output.
lists and