Hitachi XP P9500 User Manual page 400

etc/opt/SUNWmd
SC3.0
etc/cluster
#1
An output directory is created in the specified directory when you extract
the getras.tar.Z file.
#2
The value N depends on the setting in the dlmwebagent.properties file.
The default value is 2.
#3
The file might not be created depending on the device managed by HDLM.
#4
In the actual file name, a file number is appended to Trace-file-prefix
specified-in-the-Hitachi-Network-Objectplaza-Trace-Library-utility2. For
example, the default will be hntr21.log to hntr216.log. Note that the 2
following the integrated trace file prefix does not represent a file number.
#5
7-14
#1
Output directory
#6
#6
#6
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Files
Status database information
SVM_metadb.txt
Volume information
SVM_metastat.txt
Diskset information
SVM_metaset.txt
metastat -s diskset-name
SVM_metastat-
s.txt information
SDS input parameter file
md.tab
SDS configuration backup file
md.cf
Information on SDS status
mddb.cf
database copy storage locations
(Not applicable) Sun Cluster information collection
directory
SC3.0_pkginfo.txt Package information
Cluster status snapshot
SC3.0_scstat-
q.txt
Cluster configuration information
SC3.0_scconf-
p.txt
Mapping information between
SC3.0_scdidadm-
HDLM drivers and device IDs
L.txt
List of directories and files in the /
SC3.0_dev_did_dsk
.txt dev/did/dsk directory
List of directories and files in the /
SC3.0_dev_did_rds
k.txt dev/did/rdsk directory
All directories and Cluster configuration information
files in the /etc/ for Sun Cluster
cluster directory
Explanation