Hitachi XP P9500 User Manual page 527

Message
ID
KAPL10723 The execution of dlmvxexclude is
-I not required for the configuration.
KAPL10751 The dlmsetboot utility started.
-I Start time = aa...aa
KAPL10752 The dlmsetboot utility completed
-I successfully. End time = aa...aa
KAPL10753 The dlmsetboot utility terminated
-E unsuccessfully. End time = aa...aa
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Message Text
Messages
Explanation
None. For details on the
dlmvxexclude utility, see
dlmvxexclude Utility for Assisting
Creation of the VxVM
Configuration File on page
Details
The devices from VxVM do not
need to be disabled so the
dlmvxexclude utility does not
need not be executed.
Action
It is not necessary to execute this
utility. For details on the
dlmvxexclude utility, see
dlmvxexclude Utility for Assisting
Creation of the VxVM
Configuration File on page
Details
The dlmsetboot utility started.
aa...aa: year (4 digits)/month/
date hour:minute:second
Action
None.
Details
The dlmsetboot utility completed
successfully.
aa...aa: year (4 digits)/month/
date hour:minute:second
Action
None.
Details
The dlmsetboot utility terminated
unsuccessfully.
aa...aa: year (4 digits)/month/
date hour:minute:second
Action
After the dlmsetboot utility
terminates, check the contents of
the messages. If the contents are
incorrect, correct them and then
try to execute this utility again.
For details on the dlmsetboot
utility, see The dlmsetboot Utility
for Assisting Configuration of an
HDLM Boot Disk Environment on
page 7-21.
The
7-26.
The
7-26.
8-103