Hitachi XP P9500 User Manual page 370

In the sub-parameters, -hdev or -pathid, you can filter the LU
information to be displayed. If you omit both parameters, the command
displays the information about all the LUs recognized by HDLM.
For details on the contents of each displayed item, see
Displayed LU Information on page
The following shows the sub-parameters:
-hdev host-device-name
-pathid AutoPATH_ID
-t
Example
6-52
Filters the information only for the LUs corresponding to the specified
host device.
Specify the name of the logical device file (minus the slice number, in
cUtXdY format) for the HDLM device to indicate the desired host
device.
The host-device-name string is case-sensitive.
Use this parameter to display only the information about the LU that
is connected to the path with that specified AutoPATH_ID.
Omits the title for each information item.
The following example shows how to add SLPR, PathName, ChaPort,
CLPR, Type, IO-Count, IO-Errors, DNum, IEP, and Physical Device to
the displayed items for LU information.
Command Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
6-55.
Table 6-17