Collecting Error Information Using The Utility For Collecting Hdlm Error Information (Dlmgetras); Collecting Audit Log Data - Hitachi XP P9500 User Manual

¢
¢
¢
Collection levels for log information in trace files:
¢
¢
¢
¢
¢
For details on how to change the collection level, see
Functions on page
Collecting Error Information Using the Utility for Collecting HDLM
Error Information (DLMgetras)
HDLM provides a utility for collecting HDLM error information (DLMgetras).
By executing this utility, you can simultaneously collect all the information
required for analyzing errors: information such as error logs, integrated trace
files, trace files, definition files, core files, system crash dump files, and
libraries You can use the collected information when you contact your HDLM
vendor or maintenance company (if there is a maintenance contract for
HDLM).
For details on the DLMgetras utility, see
HDLM Error Information on page

Collecting Audit Log Data

HDLM and other Hitachi storage-related products provide an audit log
function so that compliance with regulations, security evaluation standards,
and industry-specific standards can be shown to auditors and evaluators. The
following table describes the categories of audit log data that Hitachi storage-
related products can collect.
StartStop
Collects error information from the Warning level and higher.
Collects error information from the Information level and higher.
Collects error information from the Information level and higher
(including maintenance information).
Outputs no trace information
Outputs error information only
Outputs trace information on program operation summaries
Outputs trace information on program operation details
Outputs all trace information
3-120.
Table 2-8 Categories of Audit Log Data that Can Be Collected
Category
An event indicating the startup or termination of hardware
or software, including:
•
•
HDLM Functions
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
The DLMgetras Utility for Collecting
7-3.
Explanation
OS startup and termination
Startup and termination of hardware components
(including micro-program)
Setting Up the HDLM
2-31