Parameters; Format - Hitachi XP P9500 User Manual

Format

/opt/DynamicLinkManager/bin/dlmlisthdev input-file-name

Parameters

input-file-name
Specifies, as an input file, the name of the output file that stores the
output result of the dlnkmgr command's view -path operation executed
before HDLM 04-00 or 04-01 was uninstalled. You cannot specify multi-
byte characters.
Examples
Example
Referring to the output results of the dlnkmgr command's view -path
operation, which are saved in the /var/tmp/old_view_path_list.txt
file, results in the creation of a list that shows the correspondences of the
logical device file names of HDLM devices.
# /opt/DynamicLinkManager/bin/dlmlisthdev /var/tmp/
old_view_path_list.txt
When upgrading HDLM 04-00 to HDLM 7.2 in a Solaris 8
environment
To make HDLM devices usable in a new environment when HDLM is
upgraded from 04-00 to 7.2 in Solaris 8:
1 Save the logical device file names of the HDLM devices used in HDLM
.
04-00.
Before uninstalling HDLM 04-00, execute the dlnkmgr command's view -
path operation to save the output result in a file that has any desired file
name.
# /opt/DynamicLinkManager/bin/dlnkmgr view -path > /var/tmp/
old_view_path_list.txt
2 After uninstalling HDLM 04-00, use the reconfiguration option to restart
.
the host.
3 Install HDLM 7.2.
.
4 To confirm that HDLM has been successfully installed, check the path
.
configuration in HDLM 7.2.
5 Create a list that shows the correspondences between the logical device
.
file names of the HDLM devices in HDLM 04-00 and those in HDLM 7.2.
As the input file for the command, specify the file that stores the output
result of the dlnkmgr command's view -path operation executed before
HDLM 04-00 was uninstalled. Executing the following command creates a
list for the correspondence of the logical device file names, and displays
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
7-19