Hitachi XP P9500 User Manual page 433

Message
ID
KAPL01021 Cannot execute the HDLM
-E command due to insufficient
memory.
KAPL01023 The last Online path for the device
-W cannot be placed Offline(C).
KAPL01024 The specified parameters cannot be
-W specified at the same time.
Operation name = aa...aa,
parameters = bb...bb
KAPL01036 The Offline path cannot be placed
-E online. PathID = aa...aa
KAPL01039 During the online operation
-W processing of the HDLM command,
a path that cannot be placed in the
Online status was detected. PathID
= aa...aa Would you like to
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Message Text
Messages
Explanation
Details
Memory required for HDLM
command processing could not be
allocated.
Action
Terminate unnecessary
applications to increase the
amount of free memory, and then
retry.
Details
The path specified for the
offline operation cannot be set
to Offline(C) because it is the
last, available path to the LU from
the host.
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the status of the paths. For
details on the view operation, see
view (Displays Information) on
page 6-30.
Details
aa...aa: clear, monitor,
offline, online, set, or view
bb...bb: Parameters that cannot
be specified at the same time
Action
Execute help operation of the
HDLM command (dlnkmgr) to
check which parameters can be
specified at the same time, and
then retry. For details on the
help operation, see
(Displays the Operation Format)
on page 6-4.
Details
aa...aa: Path ID (decimal
(base-10) number)
Action
Remove the error in the path,
and then retry.
Details
A path that cannot be placed
Online was detected during
multipath online processing.
help
8-9