Hitachi XP P9500 User Manual page 123

If the DVD-ROM cannot be automatically mounted, execute the following
command to mount the DVD-ROM:
# mount -F hsfs -o ro DVD-ROM-device-name DVD-ROM-mount-point
The following shows an example of executing the command for mounting
the DVD-ROM:
# mkdir /cdrom/cdrom0
# mount -F hsfs -o ro /vol/dev/dsk/c0t6d0/DVD-ROM-volume-name /
cdrom/cdrom0
12 Perform the installation.
.
If you are not performing an unattended installation of HDLM, execute
¢
either of the following installation commands:
When executing the installux.sh script
# DVD-ROM-mount-point/installux.sh
When executing the pkgadd command
# pkgadd -d DVD-ROM-mount-point/HDLM_Solaris DLManager
If you are performing an unattended installation of HDLM, execute the
¢
installux.sh script or the installhdlm utility as shown below.
When executing the installux.sh script
# DVD-ROM-mount-point/installux.sh -f /any-directory/
installation-information-settings-file
When executing the installhdlm utility
# DVD-ROM-mount-point/HDLM_Solaris/hdlmtool/instutil/
installhdlm -f /any-directory/installation-information-
settings-file
If execution of the utility is completed without problems, the
KAPL09211-I message is output.
After confirming that the KAPL09211-I message has been output,
execute the following command to delete the installation-information
settings file:
# rm -r /any-directory/installation-information-settings-
file
If the driver_config key is set to n (so that the dlmsetconf utility is
not executed) in the installation-information settings file, go to step
15.
If the driver_config key is set to y (to execute the dlmsetconf
utility) in the installation-information settings file, go to step 17.
13 Continue by following the instructions displayed on the screen:
.
If the license key file named /var/tmp/hdlm_license is not saved, a
message, showing whether a user-specified license key file has been
saved, is output. Enter 1 if a user-specified license key file has been
saved. Enter 2 if a license key is specified directly.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
3-59