Setting The Trace File Size; Setting The Number Of Trace Files; Setting Up Audit Log Data Collection - Hitachi XP P9500 User Manual

Setting the Trace File Size

Trace files for which you can set a trace file size are hdlmtrn.log (n indicates
a file number from 1 to 64). The length of a trace file is fixed, regardless of
how much trace information is actually in the file.
For the trace file size, you can specify a value (in kilobytes) from 100 to
16000. If you specify a value smaller than the setting value, the KAPL01097-
W message is displayed to confirm execution, and the trace file is temporarily
deleted.
When all the trace files become full, the oldest file is overwritten with any
new trace data.
By specifying both the trace file size and the number of trace files, you can
collect up to 1024000 kilobytes of trace data.
The following shows an example command that is used to set the trace file
size:
# /opt/DynamicLinkManager/bin/dlnkmgr set -systfs 2000
Specify the size of the trace file in kilobytes.

Setting the Number of Trace Files

Trace files for which you can set the number of files are hdlmtrn.log (n
indicates a file number from 1 to 64).
For the number of the trace files, you can specify a value from 2 to 64. If you
specify a value smaller than the value that has already been specified, the
KAPL01097-W message will be displayed to confirm the execution, and the
trace file will be temporarily deleted.
By specifying both the trace file size and the number of trace files, you can
collect up to 1024000 kilobytes of trace data.
The following shows an example command that is used to set the number of
trace files:
# /opt/DynamicLinkManager/bin/dlnkmgr set -systfn 10
Specify the number of trace files in numbers.

Setting Up Audit Log Data Collection

If you want to collect audit log data, you must also specify the collection level
for audit log data and the audit log categories.
Table 3-27 Values Indicating Audit Log Data Collection Levels on page 3-127
describes the values that indicate audit log data collection levels. An audit log
data collection level is a severity level. The default is 6.
3-126
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))