Hitachi XP P9500 User Manual page 515

Message
ID
KAPL10320 The file format is invalid. File name
-E = aa...aa
KAPL10328 The entered value is invalid. The
-E HDLM-configuration definition
utility processing will now stop.
Execute the HDLM-configuration
definition utility again.
KAPL10329 A file could not be opened. File
-E name = aa...aa, Errno = bb...bb.
Refer to the Messages section of
the HDLM User's Guide for
instructions to correct this problem.
KAPL10334 Ioctl aa...aa failed with errno =
-E bb...bb. Execute the DLMgetras
utility to collect error information,
and then contact your vendor or
maintenance company.
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Message Text
Messages
Explanation
Contact your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
Details
The file format is invalid.
aa...aa: File name
Action
Re-execute the HDLM-
configuration definition utility. If
the same message is output,
contact your HDLM vendor or
maintenance company if you have
a maintenance contract for HDLM.
For details on the dlmcfgmgr
utility, see The dlmcfgmgr Utility
for Managing the HDLM
Configuration on page
Details
Processing will stop because an
incorrect value was entered three
or more times for the message
confirming execution of the
dlmcfgmgr utility.
Action
Re-execute the dlmcfgmgr utility.
For details on the dlmcfgmgr
utility, see The dlmcfgmgr Utility
for Managing the HDLM
Configuration on page
Details
The file could not be opened.
aa...aa: File name
bb...bb: Errno (decimal number)
Action
Confirm the existence of the file
and access permission. If there is
no problem, contact your HDLM
vendor or maintenance company
if you have a maintenance
contract for HDLM.
Details
An attempt to issue an IOCTL call
has failed.
aa...aa: IOCTL Code
bb...bb: Errno (decimal number)
Action
7-15.
7-15.
8-91