Message
ID
KAPL10257
The output file (aa...aa) could not
-W
be opened. Errno = bb...bb
(cc...cc)
KAPL10258
The ioctl(aa...aa) operation has
-W
failed. Errno = bb...bb (cc...cc),
Device = dd...dd
KAPL10259
No authority to execute the
-W
dlmsetconf utility.
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Message Text
Messages
Explanation
Details
An attempt to open the output file
has failed.
aa...aa: Output file name
bb...bb: Errno (decimal number)
cc...cc: Errno string
Action
Take countermeasures according
to the Errno.
Details
An attempt to issue an IOCTL call
has failed.
This message is also output for
paths of the LUs that were
dynamically deleted.
aa...aa: IOCTL code (hexadecimal
number)
bb...bb: errno (decimal number)
cc...cc: errno string
dd...dd: Logical device file name
for the sd or ssd driver from
which information is to be
collected
Action
If the disk indicated in Device is
the LU that was dynamically
deleted, no action is required. To
prevent this message from being
output, restart the host. If the
disk indicated in Device is the LU
that was not dynamically deleted,
make sure that the disk is
properly connected to the server.
If there are any errors, remove
the error, and then re-execute the
command.
If the disk is connected properly,
contact your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
Details
You do not have a permission
required to execute the
dlmsetconf utility.
Action
Retry as a user with root
permissions.
8-89