Viewing License Information - Hitachi XP P9500 User Manual

• Path health checking
• Automatic failback
• Intermittent error monitoring
• Error log collection level
• Trace level
• Error log file size
• The number of error log files
• Trace file size
• The number of trace files
• Audit log data collection
• Audit log facility
For details on how to set up each function, see
Environment) on page
For example, to set up the error log collection level, execute the dlnkmgr
command's set operation with the -ellv parameter specified. When the
confirmation message is displayed, enter y to execute, or n to cancel the
command.
The following shows an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr set -ellv 1
KAPL01049-I Would you like to execute the operation? Operation name
= set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation name =
set, completion time = yyyy/mm/dd hh:mm:ss
#
To check whether the settings have been applied, perform the procedure
described in

Viewing License Information

This section explains how to display license information.
To display license information, execute the dlnkmgr command's view
operation with the -sys and -lic parameters specified.
The following shows an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -lic
License Type Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
#
For details on the displayed items and their descriptions, see
Information) on page
4-12
6-16.
Viewing the Operating Environment on page
-
6-30.
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
set (Sets Up the Operating
4-11.
view (Displays