Hitachi XP P9500 User Manual page 437

Message
ID
a path that cannot be placed in the
Offline(C) status was detected.
PathID = aa...aa Would you like to
continue the processing of the
offline operation? [y/n]:
KAPL01055 All the paths which pass the
-I specified aa...aa will be changed to
the Offline(C) status. Is this OK?
[y/n]:
KAPL01056 If you are sure that there would be
-I no problem when all the paths
which pass the specified aa...aa are
placed in the Offline(C) status,
enter y. Otherwise, enter n. [y/n]:
KAPL01057 All the paths which pass the
-I specified aa...aa will be changed to
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Message Text
Messages
Explanation
A path that cannot be placed set
to Offline(C) was detected during
multipath offline processing. To
ignore this path and perform
offline processing for the next
path, enter y. To cancel offline
processing, enter n.
aa...aa: Path ID (decimal
(base-10) number)
Action
If you want to continue
processing the offline operation
of the HDLM command for other
paths, enter y. If you want to
terminate processing, enter n. For
details on the offline operation,
see offline (Places Paths Offline)
on page 6-6.
Details
Multiple paths will be collectively
set to Offline(C) because the -
hba or -cha parameter was
specified. To collectively set
multiple paths to Offline(C), enter
y. To cancel the operation, enter
n.
aa...aa: CHA port, HBA
Action
If you want to execute offline
processing for the paths that
meet the specified requirements,
enter y. If you want to terminate
processing, enter n.
Details
This message re-asks the user
whether they want to set all the
paths to Offline(C). To set all the
paths to Offline(C), enter y. To
cancel the operation, enter n.
aa...aa: CHA port, HBA
Action
If you want to execute offline
processing for the paths that
meet the specified requirements,
enter y. If you want to terminate
processing, enter n.
Details
Multiple paths will be collectively
placed Online because the -hba
8-13