Hitachi XP P9500 User Manual page 346

off: Audit Log data is not collected.
-audlv audit-log-data-collection-level
Value (severity)
0
1
2
3
4
5
6
7
-category [[ss] [a] [ca]|all]
ss
a
ca
all
-audfac facility-value
Specifies the audit log facility.
Table 6-9 Values of the Audit Log Facility on page 6-29
values of the audit log facility. The default is user.
6-28
Specifies the severity level of audit log data to be collected.
Values Indicating Audit Log Data Collection Levels on page 6-28
describes the values that indicate audit log data collection levels. The
default is 6.
Table 6-7 Values Indicating Audit Log Data Collection Levels
No audit log data is collected.
Critical-level audit log data is collected.
Critical-level and Error-level audit log data is collected.
Critical-level, Error-level, and Warning-level audit log data is
collected.
Critical-level, Error-level, Warning-level, and Informational-level
audit log data is collected.
Specifies the categories of audit log data to be collected.
Values Indicating Audit Log Data Categories on page 6-28
values that indicate categories of audit log data. The default is all. If
you specify the -category parameter without specifying a value, all
is assumed.
Table 6-8 Values Indicating Audit Log Data Categories
Value
Audit log events of the StartStop category are collected.
Audit log events of the Authentication category are collected.
Audit log events of the ConfigurationAccess category are
collected.
Audit log events of the StartStop, Authentication, and
ConfigurationAccess categories are collected.
Command Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Explanation
Explanation
describes the
Table 6-7
Table 6-8
lists the