Hitachi XP P9500 User Manual page 48

Changing the
automatic failback
settings
Changing the path
status
Restarting the HDLM manager
Restarting the host
#1
When you disable the intermittent error monitoring function, information
about paths not subject to automatic failback will be reset. If you do not
want to reset the information about paths not subject to automatic
failback when you turn the intermittent error monitoring function off,
change the target paths to Offline(C).
#2
The number of errors and the time since monitoring started is reset to 0,
and then monitoring restarts in accordance with the changed monitoring
conditions.
#3
The number of errors and the time since monitoring started is reset to 0,
and then monitoring restarts at the time the HDLM manager starts.
2-26
User operation
changing the conditions)
while intermittent error
monitoring is being
performed
Changing the conditions for
an intermittent error outside
the intermittent error
monitoring
Turning off
Taking the path Offline(C)
Placing the path Online
while intermittent error
monitoring is not being
performed
Placing the path Online
while intermittent error
monitoring is being
performed
HDLM Functions
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Number of
Information
errors and time
about paths
passed since
not subject to
error
automatic
monitoring
started
(Not applicable) Inherited
(Not counted.)
Reset Reset
Reset Reset
(Not applicable) Reset
(Not counted.)
Inherited (Not applicable)
If a path has
been removed
from the paths
subject to
automatic
monitoring, that
path is no
longer
monitored.
Inherited
#3
Reset
Reset Reset
failback