Hitachi XP P9500 User Manual page 354

Parameter
and program
information
to be
displayed
Information
about the
HDLM license
-audlog
Information
about audit log
data collection
settings
#
6-36
Item
Expiration
Audit Log
Audit Log
Category
Audit Log
Facility
Command Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Description
•
Permanent
•
Temporary
•
Emergency
License expiration:
• When using a permanent license: -
• When using a temporary license or emergency
license: The license expiration period is displayed
in the following format: yyyy/mm/dd(ndays
after). When the view -sys -lic operation is
executed, (ndays after) appears if there are n
days left until the license period expires.
For example, when there are 100 days left until
the license period (2006/08/21) expires, the
following appears:
2006/08/21(100days after)
Settings for audit log data collection:
• Whether collection is enabled:
on: Enabled
off: Disabled
• Audit log data collection level:
When audit log data collection is on, the
collection level that has been set is displayed
within the parentheses following on. The
collection level indicates a severity level. A value
from 0 to 7 is displayed as the collection value.
The categories of audit log data to be output are
displayed. When more than one category is displayed,
commas (,) are used as separators.
ss: StartStop
a: Authentication
ca: ConfigurationAccess
If all the above categories are specified, all is
displayed.
If the collection of audit log data is disabled, a hyphen
(-) is displayed.
The name of the audit log facility is displayed. user,
local0, local1, local2, local3, local4, local5,
local6, or local7 is displayed.
If the collection of audit log data is disabled, a hyphen
(-) is displayed.