Hitachi XP P9500 User Manual page 482

Message
ID
KAPL09171
-E
KAPL09176
-I
8-58
Message Text
An internal error occurred in the
installation of the HDLM. Error
Code = aa...aa,bb...bb
The installation completed
successfully. Execute the
dlmsetconf utility and, if you are
using VxVM, execute the
dlmvxexclude utility. After that,
specifying the -r (reconfigure)
option, restart the host machine.
Messages
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Explanation
/opt/DynamicLinkManager/
¢
config/dlmfdrv.unconf.bak
bb...bb: Internal code (decimal
number)
Action
Execute the DLMgetras utility for
collecting HDLM error information
to obtain the error information.
Contact your HDLM vendor or your
maintenance company if you have
a maintenance contract for HDLM.
For details on the DLMgetras
utility, see The DLMgetras Utility
for Collecting HDLM Error
Information on page
Details
A system-based error, not caused
by the user, occurred during
installation of HDLM processing.
aa...aa: Error number (decimal
number) that specifies the
executed processing
bb...bb: Return value (decimal
number) of the executed
processing
Action
Contact your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
Action
a Create HDLM driver
.
configuration definition file (/
kernel/drv/dlmfdrv.conf)
by executing dlmsetconf
utility.
b When you want to specify that
.
a device is not to be managed
by HDLM, edit the HDLM
driver unconfiguration
definition file (/opt/
DynamicLinkManager/
config/dlmfdrv.unconf) and
re-execute dlmsetconf utility
with -u option.
c When you use VxVM, remove
.
HDLM devices from VxVM. The
dlmvxexclude utility assists
this.
7-3.