Before Viewing The List Of Messages; Format And Meaning Of Message Ids; Terms Used In Messages And Message Explanations; Components That Output Messages To Syslog - Hitachi XP P9500 User Manual

Hitachi dynamic link manager software user guide for solaris (6.6) (hit5205-96011, november 2011)

Hide thumbs Also See for XP P9500:

Table of Contents

Before Viewing the List of Messages

This section explains the following information that is needed to locate

messages and understand the explanations in the sections from

to KAPL02000 on page

Format and meaning of the message IDs

Terms used in the messages and message explanations

This information is explained below.

Each message has a message ID. The following shows the format and

meaning of message IDs.

The following shows the terms that may appear in messages and message

explanations.

Table 8-2 Terms Used in the Messages and Message Explanations

Operation name

Some messages for the following components are output to syslog:

HDLM manager

HDLM driver (filter component)

HDLM alert driver

8-4KAPL01001 to KAPL02000.

Table 8-1 Format and Meaning of the Message ID KAPL

Indicates that the message is an HDLM message.

Message serial number for the module

Message level

I: Information

Variable (If there is more than one variable in a single message,

they appear in succession as follows: bb...bb, cc...cc, and so on.)

The operation name that is input after dlnkmgr in the command.

Hitachi Dynamic Link Manager User Guide (for Solaris(R))

Dynamic link manager