Format; Parameters; Contents Of The Installation-Information Settings File - Hitachi XP P9500 User Manual

on page
Being Used) on page
installation of HDLM on page

Format

/directory-where-DVD-ROM-is-mounted/hdlmtool/instutil/installhdlm
{ -f installation-information-settings-file-name | -h}

Parameters

-f installation-settings-file-name
Defines the information required to perform an installation.
For details on the installation-information settings file, see
Installation-Information Settings File on page
-h
Displays help about the usage of the command.

Contents of the Installation-Information Settings File

The following describes the contents of the installation-information settings
file.
[INSTALLATION_SETTINGS] section
This section defines operation information for the installhdlm utility. The
[INSTALLATION_SETTINGS] section must be specified first in the installation-
information settings file. However, this section may be preceded by a blank
line or comment line.
Table 7-4 Keys that Can Be Defined in the [INSTALLATION_SETTINGS]
Section on page 7-29
[INSTALLATION_SETTINGS] section.
Table 7-4 Keys that Can Be Defined in the [INSTALLATION_SETTINGS]
Key name
installfile_location Specify the absolute path
3-49, Performing a New Installation of HDLM (When Sun Cluster Is
3-56, or
describes the keys that can be defined in the
#1
Explanation
name of the directory on
which the DVD-ROM is
mounted.
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Performing an Upgrade Installation or Re-
3-67.
Section
#2
For new
installati
Optional
Contents of the
7-29.
Required or
optional?
Maximu
For
m length
upgrade
(characte
installatio
n or re-
on
installatio
n
Optional 400
rs)
7-29