Hitachi XP P9500 User Manual page 530

Message
ID
KAPL10763
-E
KAPL10764
-E
KAPL10765
-I
KAPL10766
-W
8-106
Message Text
The partitions on the post-
migration boot disk device are
different from those on the pre-
migration boot disk device.
(aa...aa)
Command execution failed. Return
value = aa...aa, Command =
bb...bb
Do you use Sun Cluster or SVM?
[y/n]
The dlmsetboot utility does not
support the migration of Sun
Cluster global device file systems
or SVM state databases. Are you
sure you want to continue? [y/n]
Messages
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Explanation
Specify a disk other than the pre-
migration boot disk device for the
post-migration boot disk device.
Details
The partitions on the post-
migration boot disk device are
different from those on the pre-
migration boot disk device.
(aa...aa: Post-migration boot disk
device name (cXtYdZ))
Action
Reconfigure the post-migration
boot disk device so that its
partitions are the same as those
on the pre-migration boot disk
device.
Details
Command execution failed.
Return value = aa...aa, command
= bb...bb
aa...aa: exit status
bb...bb: executed command
#
The following information is
output:
/usr/sbin/installboot
/usr/sbin/newfs
/usr/sbin/mount
/usr/sbin/ufsdump
/usr/sbin/ufsrestore
/usr/sbin/eeprom
Action
After the dlmsetboot utility
terminates, check the contents of
the messages by the command. If
the contents are incorrect, correct
them and then try to execute this
utility again.
Details
Do you use Sun Cluster or SVM?
[y/n]
Action
Enter y or n.
Details
The dlmsetboot utility does not
support the migration of Sun
Cluster global device file systems
or SVM state databases.
#