Hitachi XP P9500 User Manual page 494

Message
ID
KAPL09239
-I
KAPL09241
-W
KAPL09242
-E
8-70
Message Text
The system will now restart.
An attempt to install an HDLM
component failed. Error Code =
aa...aa
No usable JDK or JRE exists.
Messages
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Explanation
A file other than a normal one (for
example, a directory file or a
special file.) is specified.
aa...aa: Specified file name
(character string)
Action
Specify the correct file, and then
retry the operation.
Details
The host will restart because
restart was specified in the
installation information settings
file.
Action
None.
Details
An attempt to install an HDLM
component failed.
aa...aa: Error number (decimal
number) that specifies the
executed processing
Action
Depending on the output error
code, take the appropriate action
as shown below. Note that this
requires no particular action,
because HDLM operation is not
affected when linkage with Global
Link Manager is not used.
If the error code is 3 or 100:
Wait a while, and then
execute the HDLM component
installation utility
(dlminstcomp).
If the error code is 5:
Install the prerequisite JDK,
and then execute the HDLM
component installation utility
(dlminstcomp).
If the error code is other than the
above:
Contact your HDLM vendor or
your maintenance company if
you have a maintenance
contract for HDLM.
Details
The prerequisite JDK is not
installed on the system.