Procedure For Configuring A Boot Disk Environment; Migration From An Existing Hdlm Environment - Hitachi XP P9500 User Manual

Perform the procedure described in
Migration Environment on page 3-83
Disk Environment on page
described in
Procedure for Configuring a Boot Disk Environment on page

Procedure for Configuring a Boot Disk Environment

The command examples and setting examples in this section assume the
following slice allocations:
• Slice 0: / (root) file system
• Slice 1: Swap device and dump device
• Slice 3: Sun Cluster global device file system
• Slice 6: /usr file system
• Slice 7: Replica of the SDS or SVM state database
For details on procedures involving Solaris functionality, see your Solaris
documentation.

Migration from an Existing HDLM Environment

Perform the steps below in the pre-migration environment. The workflow is
shown in
an existing HDLM environment as the pre-migration environment on page
3-78.
Setting Up the Post-Migration Environment on page 3-85
Figure 3-8 Flow of setting up the boot disk environment when using
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Migration by Building a New Pre-
in Procedure for Configuring a Boot
3-77, and then execute the procedure
in
3-77.
3-77