Hitachi XP P9500 User Manual page 212

The shaded portion indicates the devices that need to be removed from
VxVM.
2 Make an entry for the device you wish to removed from VxVM in the
.
paths section of the /etc/vx/vxvm.exclude file.
In the /etc/vx/vxvm.exclude file, write the shaded portion of the
execution result of the dlmvxexclude utility shown in step 1. The settings
will take effect when the host is restarted.
Figure 3-27 Example of a description in the /etc/vx/vxvm.exclude (paths
section) on page 3-148
etc/vx/vxvm.exclude file.
The shaded portion indicates the specified entry.
3 Execute the following command to restart the host and apply the settings.
.
# reboot
4 Execute the dlnkmgr command's view -path operation to identify the
.
HDLM devices that must be recognized by VxVM.
The following shows an example of executing the command:
3-148
shows an example of such a description in the /
Figure 3-27 Example of a description in the /etc/vx/vxvm.exclude
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
(paths section)