Hitachi XP P9500 User Manual page 345

A message confirming that the license key has been registered is
displayed, depending on the license key type described in the license
key file. For a temporary license key or emergency license key, the
expiration period is also displayed (KAPL01071-I, KAPL01072-I).
Table 6-6 License Key Types on page 6-27
types.
Type
Permanent license key
#
Temporary license key
Emergency license key
#
A temporary license key cannot be installed by using the dlnkmgr
command's set operation.
Example 1
The following example shows how to update the license key when the
license key file exists:
# /opt/DynamicLinkManager/bin/dlnkmgr set -lic
KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01071-I A permanent license was installed.
#
Example 2
The following example shows how to update the license key when the
license key file does not exist:
# /opt/DynamicLinkManager/bin/dlnkmgr set -lic
KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01083-I There is no license key file. File name = /var/
tmp/hdlm_license
KAPL01068-I Enter a license key:*************
KAPL01071-I A permanent license was installed.
#
-audlog {on [-audlv audit-log-data-collection-level] [-category [[ss]
[a] [ca]|all]]|off}
Specifies whether to collect audit log data.
on: Audit Log data is collected.
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Table 6-6 License Key Types
Permanent license keys are valid for using HDLM permanently.
Temporary license keys are used temporarily, for example,
when a user needs to perform product evaluations. Temporary
license keys are valid for 120 days after the installation. You
cannot reuse a temporary license key.
Emergency license keys are used temporarily, for example,
when waiting for a permanent license key to be issued.
Emergency license keys are valid for 30 days after they are
entered. You cannot reuse an emergency license key.
Command Reference
lists the license key
Description
6-27