Parameters; To Place Paths Offline - Hitachi XP P9500 User Manual

Parameters

To place paths offline

-path
Indicates that the target of the operation is a path managed by HDLM.
This parameter is optional because offline is always used for paths, so it
is assumed.
Make sure that you specify the paths to be taken offline by using the -
hba, -hbaid, -cha, -chaid, -pathid, or -device parameter.
-hba host-port-number.bus-number
Use this parameter to place offline, at one time, all the paths that pass
through a specific HBA port. The command will place offline all the paths
connected to the HBA port that has the specified host port number and
bus number.
Specify the host port number and bus number of the target HBA port: the
numbers are found in the PathName field displayed using the view
operation. Enter a period between these two parameter values. For
details on the view operation, see
6-30.
Example
-hbaid HBA-port-ID
Use this parameter to place offline, at one time, all paths that pass
through a specific HBA port. The command will place offline all paths
connected to the HBA port that has the specified HBA-port-ID. To display
the HBA port IDs, execute the following view operation:
# /opt/DynamicLinkManager/bin/dlnkmgr view -hba
For details about how to execute the view operation to display the HBA
port IDs, see
To display HBA port information on page 6-58
in
Example
The following example shows how to place offline all paths connected
to the HBA port whose host port number is 0001 and bus number is
0000:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -hba 0001.0000
KAPL01055-I All the paths which pass the specified HBA will
be changed to the Offline(C) status. Is this OK? [y/n]:y
KAPL01056-I If you are sure that there would be no problem
when all the paths which pass the specified HBA are placed in
the Offline(C) status, enter y.
KAPL01061-I 3 path(s) were successfully placed Offline(C); 0
path(s) were not. Operation name = offline
#
Parameters on page
The following example shows how to place offline all paths connected
to the HBA port whose HBA-port-ID is 00001.
Command Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
view (Displays Information) on page
Otherwise, enter n. [y/n]:y
6-32.
6-7