When Creating An Oracle9I Rac Environment - Hitachi XP P9500 User Manual

#11
For a two-node configuration, the pathcount setting is only supported for
the SCSI protocol (fencing protocol) of the storage device.
For details on how to specify SCSI protocols for storage devices, refer to
the Sun Cluster manual.
#12
For the EFI label or ZFS, only two-node configurations are supported.
#13
Only two-node configurations are supported.
#14
You must apply MP1 or later.
#15
You must apply MP1 or later when using the I/O fencing function. The I/O
fencing function can be used only when Hitachi USP, Universal Storage
Platform V/VM, or Virtual Storage Platform storage systems are connected
in a Solaris 10 environment. Note that the only supported service group
type is the failover service group. The parallel service group and hybrid
service group are not supported.
#16
You must apply MP1 or later when using the I/O fencing function. The I/O
fencing function can be used only when Hitachi USP, Universal Storage
Platform V/VM, or Virtual Storage Platform storage systems are connected
in a Solaris 10 environment. Note, the parallel service group is the only
supported service group type. The failover service group and hybrid
service group are not supported.

When Creating an Oracle9i RAC Environment

Required programs
Table 3-4 Programs required to create an Oracle9i RAC environment (for
Solaris 10) on page 3-10
RAC environment.
Table 3-4 Programs required to create an Oracle9i RAC environment (for
OS
Cluster
3-10
list the programs required to create an Oracle9i
Program
Solaris 10
Sun Cluster 3.1 8/05
Sun Cluster Support for Oracle
Parallel Server/Real Application
Clusters 3.1
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Solaris 10)
--
HDLM supports the two-node
configuration only.
Required packages:
•
•
Remarks
SUNWschwr
SUNWscor